Find the product you need

News

ELISA Kit for Thyroxine (T4)

Catalog number: CEA452Ge
Brand: Cloud-Clone Corp.
Packing: 96-well strip plate
Price: On Request
Expected delivery time: 14 days
Quantity:
Spin UpSpin Down

Product specifications for - ELISA Kit for Thyroxine (T4)

Overview: 
Product group: Assays
Category: ELISA / EIA
Target: T4
Properties: 
Assay Sensitivity: The minimum detectable dose of this kit is typically less than 1,49ng/mL
Assay Specificity: This assay has high sensitivity and excellent specificity for detection of Thyroxine (T4). No significant cross-reactivity or interference between Thyroxine (T4) and analogues was observed.
Assay Sample Type: Serum, plasma and other biological fluids;
Assay Time: 2,5 hours
Assay Detection Range: 3,7-300ng/mL: The standard curve concentrations used for the ELISA’s were 300ng/mL 100ng/mL 33,33ng/mL 11,11ng/mL 3,7ng/mL
Assay Test Principle: This assay employs the competitive inhibition enzyme immunoassay technique. An antibody specific for Thyroxine (T4) has been pre-coated onto a microplate. A competitive inhibition reaction is launched between Horseradish Peroxidase (HRP) labeled Thyroxine (T4) and unlabeled Thyroxine (T4) (Standards or samples) with the pre-coated antibody specific for Thyroxine (T4). After incubation the unbound conjugate is washed off. The amount of bound HRP conjugate is reverse proportional to the concentration of Thyro
Datasheet: Datasheet
  Research Use Only
UNSPSC: 41116158
Scientific information: 
Scientific info: The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition. To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end. Procedure: 1. Prepare all reagents, samples and standards, 2. Add 50 uL standard or sample to each well. And then add 50 uL prepared Detection Reagent A immediately. Shake and mix. Incubate 1 hour at 37°C, 3. Aspirate and wash 3 times, 4. Add 100 uL prepared Detection Reagent B. Incubate 30 minutes at 37°C, 5. Aspirate and wash 5 times, 6. Add 90 uL Substrate Solution. Incubate 15-25 minutes at 37°C, 7. Add 50 uL Stop Solution. Read at 450 nm immediately.
Additional information: 
Synonyms: CEA452Ge; T4