High Sensitive ELISA Kit for Tumor Necrosis Factor Alpha (TNFa)

Product specifications for - High Sensitive ELISA Kit for Tumor Necrosis Factor Alpha (TNFa)

Overview:
Product group:	Assays
Category:	ELISA / EIA
Target:	TNF
Target description:	tumor necrosis factor

Properties:
Assay Sensitivity:	The minimum detectable dose of this kit is typically less than 0,59pg/mL
Assay Sample Type:	Serum, plasma, tissue homogenates, cell lysates, cell culture supernates and other biological fluids;
Assay Time:	4,5 hours
Assay Detection Range:	1,563-100pg/mL: The standard curve concentrations used for the ELISAs were 100pg/mL 50pg/mL 25pg/mL 12,5pg/mL 6,25pg/mL 3,125pg/mL 1,563pg/mL
Assay Test Principle:	The microtiter plate provided in this kit has been pre-coated with an antigen. Standards or samples are then added to the appropriate microtiter plate wells with a biotin-conjugated secondary antibody. Next, Avidin conjugated to Horseradish Peroxidase (HRP) is added to each microplate well and incubated. After TMB substrate solution is added, only those wells that contain High Sensitive Tumor Necrosis Factor Alpha (TNFa), biotin-conjugated antibody and enzyme-conjugated Avidin will exhibit a change in color
Datasheet:	Datasheet
	Research Use Only
UNSPSC:	41116158

Scientific information:
Scientific info:	The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition. To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end. Procedure: 1. Prepare all reagents, samples and standards, 2. Add 100 uL standard or sample to each well. Incubate 2 hours at 37°C, 3. Aspirate and add 100 uL prepared Detection Reagent A. Incubate 1 hour at 37°C, 4. Aspirate and wash 3 times, 5. Add 100 uL prepared Detection Reagent B. Incubate 30 minutes at 37°C, 6. Aspirate and wash 5 times, 7. Add 90 uL Substrate Solution. Incubate 15-25 minutes at 37°C, 8. Add 50 uL Stop Solution. Read at 450nm immediately.
Gene ID:	7124

Scientific information:

Scientific info:

The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition. To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end. Procedure: 1. Prepare all reagents, samples and standards, 2. Add 100 uL standard or sample to each well. Incubate 2 hours at 37°C, 3. Aspirate and add 100 uL prepared Detection Reagent A. Incubate 1 hour at 37°C, 4. Aspirate and wash 3 times, 5. Add 100 uL prepared Detection Reagent B. Incubate 30 minutes at 37°C, 6. Aspirate and wash 5 times, 7. Add 90 uL Substrate Solution. Incubate 15-25 minutes at 37°C, 8. Add 50 uL Stop Solution. Read at 450nm immediately.

Gene ID:

7124

Additional information:
Synonyms:	HEA133Hu; TNF alpha; TNF Alpha / TNF; TNF; TNFSF2; TNFA; TNF-alpha; DIF; tumor necrosis factor-alpha; tumor necrosis factor ligand superfamily member 2; cachectin; TNF-a; TNF, monocyte-derived; TNF, macrophage-derived; APC1 protein; tumor necrosis factor

Login

News

Product specifications for - High Sensitive ELISA Kit for Tumor Necrosis Factor Alpha (TNFa)